中文
English
Pусский
Español
Our DOL starter panel connects the motor directly to the power supply, thus achieving full voltage starting. The rotor induced current is high. This makes the peak current reach 5 - 8 times the nominal current. The motor soft starters are all 220V 60Hz, and each set is equipped with a switchboard with a main circuit breaker.
Soft Starters for electric motors all are 220V 60Hz each set have panel board with Main Breakers
1. 7 units 3Kw
2. 1Kw, 2Kw, 3Kw, 2x 1.5Kw
3. 3Kw, 4Kw, 2x 11Kw
1. DOL starter control cabinet--7 units 3Kw
2.DOL starter control cabinet --1Kw, 2Kw, 3Kw, 2x 1.5Kw
3. Soft starter control cabinet--3Kw, 4Kw, 2x 11Kw
Related Products
News Center
> Double Motor Life: Adding a ZJR7 Soft Starter to DOL Start | ZIRI
If you manage industrial motors, you have probably noticed that motors started with direct‑on‑line (DOL) methods tend to fail earlier than expected—winding insulatio...
Release Date:2026-06-16> How to Choose a Solar Pumping Inverter for Agriculture | ZIRI
For many farmers, the cost of diesel or grid electricity for irrigation has become a growing financial burden, especially in regions where power supply is inconsiste...
Release Date:2026-06-10> Stop VFD Overheating with Proper Carrier Frequency Setting
Every maintenance engineer knows the frustration: an alarm light flashing on a drive, followed by a costly production pause. The culprit is often heat—specifically, ...
Release Date:2026-05-29> Why Your VFD Trips Overcurrent – 3 Quick Fixes
Another production stoppage. Another fault code blinking on the drive display. You reset it, restart the line, and minutes later—the same trip. You are not alone.
Release Date:2026-05-20